BAGI - CM MIXER
BAGI – CM MIXER
- The use of Kweng BAGI CM Bottom-mounted Magnetic Agitators with Extended Shaft and Multiple Impellers in bio-reactors permits safe process execution for long periods, since there is no risk of contamination entering the reactors through mechanical seals
- The number and type of impellers can be selected to match the process requirements. The Impellers are preferably mounted on sealed sliding hubs with sterile design.
- The Kweng BAGI CM Agitators are available in various sizes, from laboratory models to models for fermentation volumes of several hundred (micro-organisms) or several thousand litres (cell cultures).
Benefits:
- Magnetically Coupled, Hermetically Sealed
- SIP/CIP Capable with Industry acceptable Standards & Protocols
- Designed to meet FDA & CGMP Guidelines
- Ideal for continious batch operation
- Variety of Material of Construction
- The Impellers are preferably mounted on sealed sliding hubs with sterile design
- The number and type of impeller blades are selected based on specific applications
- Modular Weld Plates available.
Uses :
- The Kweng BAGI CM Agitators are widely used in fermentation of cell cultures, fermentation of virus cultures and fermentation of bacteria and micro-organisms.
- The Kweng BAGI CM Agitators can be used for volumes from 10 L to 20,000 L
Material of Construction :
Part
|
Description
|
Material
|
1
|
Agitator/Impeller Shaft
|
Standard AISI 316L (1.4435)
Optional AISI 904L, Hastelloy C22
|
2
|
Weld Plate
|
Standard AISI 316L (1.4435)
Optional AISI 904L, Hastelloy C22
|
3
|
Bearings
|
Standard Sintered SIC Bush Bearings
Optional Ceramic Bearings ZrO2/Si3N4
|
4
|
O-Rings
|
Standard EPDM
Optional FEP/Silicone/Viton
|
5
|
Motor
|
Direct Drive /Geared Drive |
Applications :
- Vaccines & Injectables
- Pharmaceutical Manufacturing
- Food Processing
Shear – Low
|
Low
|
Max RPM
|
400
|
Max Volume
|
20000L
|
Max Viscosity
|
800 cP
|
Design Temp.
|
-5°C to +150°C
|
Design Pressure
|
-1.03 to 10 Bar (g)
|
Surface Treatment
|
Manual & e-polish
|
Surface Quality
|
Standard : Ra: < 0.5 μm Optional : Ra: <0.25 μm |
Standards
|
accordingly : ASME BPE
|
Fixation of Impeller
|
Standard : Modular – Sealed sliding hub
Optional : Fixed – Welded to the shaft
|