KWENG MAGNETIC MIXERS: BAGI - CM
KWENG MAGNETIC MIXERS: BAGI—CM
- The use of Kweng Magnetic Mixers: BAGI—CM; bottom-mounted magnetic agitators with extended shafts and multiple impellers in bioreactors permits safe process execution for long periods since there is no risk of contamination entering the reactors through mechanical seals.
- You can select the number and type of impellers that match the process requirements. Preferably, you mount the impellers on sealed sliding hubs with a sterile design.
- The Kweng Magnetic Mixers: BAGI—CM are available in various sizes, from laboratory models to models for fermentation volumes of several hundred (microorganisms) or several thousand liters (cell cultures).
Benefits:
- Magnetically Coupled, Hermetically Sealed.
- SIP/CIP is capable of meeting industry-acceptable standards and protocols.Designed to meet FDA & CGMP guidelines.
- Ideal for continuous batch operation.
- Variety of Material of Construction.
- The impellers are preferably mounted on sealed sliding hubs with a sterile design.
- Specific applications determine the number and type of impeller blades.
- Modular weld plates available.
Uses:
- The Kweng Magnetic Mixers: BAGI—CM are widely used in the fermentation of cell cultures, the fermentation of virus cultures, and the fermentation of bacteria and micro-organisms.
- You can use the Kweng Magnetic Mixers: BAGI – CM for volumes ranging from 10 L to 20,000 L.
Material of Construction:
Part | Description | Material |
1 | Agitator/Impeller Shaft | Standard AISI 316L (1.4435) Optional AISI 904L, Hastelloy C22 |
2 | Weld Plate | Standard AISI 316L (1.4435) Optional AISI 904L, Hastelloy C22 |
3 | Bearings | Standard Sintered SIC Bush Bearings Optional Ceramic Bearings ZrO2/Si3N4 |
4 | O-Rings | Standard EPDM Optional FEP/Silicone/Viton |
5 | Motor | Direct Drive /Geared Drive |
Applications:
- Vaccines & Injectables
- Pharmaceutical Manufacturing
- Food Processing
|
Shear – Low
|
Low
|
|
Max RPM
|
400
|
|
Max Volume
|
20000L
|
|
Max Viscosity
|
800 cP
|
|
Design Temp.
|
-5°C to +150°C
|
|
Design Pressure
|
-1.03 to 10 Bar (g)
|
|
Surface Treatment
|
Manual & e-polish
|
|
Surface Quality
|
Standard : Ra: < 0.5 μm Optional : Ra: <0.25 μm |
|
Standards
|
accordingly : ASME BPE
|
|
Fixation of Impeller
|
Standard : Modular – Sealed sliding hub
Optional : Fixed – Welded to the shaft
|